SignaLink™ Radio Cable
The radio cable p/n SLCAB847 is designed to work with the SignaLink USB sound card radio interface as well as the older SignaLink SL-1+ model. It is ~3 feet in length.
This cable is compatible with the Yaesu FT-847's rear panel "Data I/O" jack for HF operation only. It is also compatible with some radios that use a single 3.5mm stereo plug for Mic/PTT, Audio Out, and Ground, such as the Xiegu X1M series of QRP radios.
The recommended Plug & Play Jumper Module for the Yaesu FT-847 is p/n SLMODHT. Please note that this module has a built-in resistor and capacitor that are required by the radio. You must use this jumper module with this radio, or you will need to figure out how to install your own resistor and capacitor inside the SignaLink (not easy!).
Yaesu FT-847 (REQUIRES Jumper Module p/n SLMODHT)
Xiegu X1M / X1M PRO (Contact us for the jumper settings. These radios DO NOT use Jumper Module p/n SLMODHT)
If your radio is not listed below then be sure to check our other listings or contact us. We have a number of different SignaLink part numbers available to fit most standard radios.